hi brought r&d dry pipe but dont no what size jets to run in it das any one no and has has any one have the jets. thanks
hi was going to put it in my 1996, super jet but also have a 2008 what is the differents between the motors ?
96 onwards came out with the twin carb motor and pre 96 had single carb with a different style intake. If your using the stock 38s with standard needle/seat then 140 main jets are what you need.
1.5 needle and seat,95 gram spring,75 pilot's,140 mains is a good starting point. Set both adjusters to 1 turn out from closed. Those pipes definatly need water injection to give them bottom end. I had one on my ski in NZ for about 5 year's. A great high performance pipe.