Im guessing you mean a water bypass line?? Yea, you can. Go have a look at the pics of my ski with the new head on and you'll see the 2 lines coming out of the head. One of them is water in to the head the other one is water out and it goes down into a "T" then out a bypass nozzle in the hull. I have 2 bypasses. The "T" is only there to send a bit of water down to the pipe stinger. If you already have water to your stinger nipple, and im assuming you have, then you should be able to put a nipple into the head and run it straight to a "Pisser"
yea water bypass. thats what i was thinking of, but does the size of the outlets have to be the same? ive only got the stock one and the one which came with my pipe 5mm and 8mm. so i guess ill be after a matching set. where is a good place to order them from?
Have a talk to Roger at Jetwerks, he has all the parts you need. He will have a nipple for the head if you dont have one and I know he has bypass outlets for the hull cos I bought 2 off him. I think the b ypass outlets are around $20 each and they look pretty snazzy. You'd be best to replace them both with new bigger ones so they get good flow and look the same. Up to you though? Give him a call. 0212248420
