Separate names with a comma.
flyboard I fitted one to customers rxt a few weeks ago pretty simple other than some clever swivel fittings He said it was great his kids (older)...
there is a complete yami pump setup on trademe at the moment that has a complete tunnel as well I did a small boat with this type of drive line and...
if you get stuck for that exhaust stuff go to a trucking spares store they carry lots of silicone hose for truck intercoolers so usually have all...
clearly the nob part of your name is correct :roll:
i have a few if you dont find one up there I can send one up for $50 inc freight Jason
YTX20 is the right battery
be a man and put the gp motor in there!
for any thing like this in the future I have used heat guns to heat flywheel when in the ski(fuel tank close) and you can get a fair amount of heat...
adapter I have one somewhere I will see if i can find it and let you know
I got things to do in the arvo so going to the lake at 11. Hope the weather is a bit nicer than today :roll: c ya if there.
what time you guys going out I have some mods to test as well and can help you if needed sikazz sorry we were s to busy at the shop to help but this...
We get them done all the time at our engine reconditioner (specialises in jetskis etc) and we usually stock the rods and bearings at the shop if you...
really only need a head pipe as have lots of manifolds a mod pipe chamber and limited chamber,yami 650 chamber xi chamber all new old stock but no...
Dazza let me know if you want to sell it even if its wrong wont matter to much as Im making a chamber to suit and have 3 manifolds with different...
I have never had a problem with that gasket are the bolts coming loose or gasket just blowing? you can weld the top of the madifold and machine it...
thinking about it would rather chew my own arm off than buy from him but may have no option
the big alloy section between manifold and chamber has the water adjustment screws in it. cheers
If anyone has one or knows of one in any condition :roll: I want to experiment with some chambers I have laying around
with umi and copies of them you have to remove the big rubber strip or it wont pivot. Sometimes they pop out as they are on 3 little rubber plugs but...
coil what model we may have an old stock new one at the shop we can do a deal on.
