Knoxie Aluminum Poles!

Discussion in 'KP Parts' started by knoxie, December 4, 2012.

  1. knoxie

    knoxie Active Member

    Finally got another batch all done

    [​IMG]

    comes with all the SS fasteners required and chin pad bracket and cable holder and tubes long enough for aftermarket hulls, (can be cut down to superjet length) mounting points for pre08 & 08+ length steering cables,

    $650 as bare ally ...as most seem to want to do their own thing; polish , powder coat , anodise etc ...altho can look into getting parts done as you want.


    [​IMG]

    [​IMG]





    polsihed version as featured on Taynes JB1

    http://www.dalusionfwx.co.nz/forum/viewtopic.php?t=2909
  2. SirMrManGuy

    SirMrManGuy Member

    Are your tubes the same diameter as RRP? I may need to pick up a longer set of tubes for my ski.
  3. knoxie

    knoxie Active Member

    I use 2.5" tubes (63.5mm)
  4. Rdrttoy

    Rdrttoy New Member

    I would like to get one of these poles. I don't think there are very many up here in the United States. Would it be possible to buy one and have it shipped to my buddy in Auckland? He come back and fourth from NZ to the US. You actually might know him his name is Roger. He told me to look up these poles because I was looking at an RRP. Do you make any other products? It's very difficult to search this forum on my phone. Just let me know. Thanks!
  5. DanW

    DanW Member

    Yeah most of us know Parker Alright :D. Im sure he will bring one back for ya. Very cheap and light compared to the RRP etc. RRP also use a stupid size on there tubes making them hard to replace its like 62.8mm or something meaning you have to use there tubes and cant just use 2.5inch (63.5) off the shelf. goodluck and tell Rodger he owes me some Coronas I'm not sure what for but I will think of something
  6. knoxie

    knoxie Active Member

    hi, yeah i know Roger, would not be a problem to pass one onto him for you, I do a couple of other things, Battery boxes, turn plates, pole brackets, engine keepers.
  7. Rdrttoy

    Rdrttoy New Member

    I'd interested in some turn plates and engine keepers. Can you post up a picture or a link to them? It's difficult to search for them on this forum using my phone. Lol.
  8. im pretty keen on a pole just got my pre 08 cable to go on 09 ski for more nozzle throw are the cable brackets on these the same as pre 08 poles, also how much freight to palmerston north please email me mark_xsport@hotmail.com
  9. knoxie

    knoxie Active Member

    Turn plate:
    http://www.dalusionfwx.co.nz/forum/viewtopic.php?t=2778

    and ill get some pics of the keepers up for you.
  10. knoxie

    knoxie Active Member

    there are a number of mounting holes for the cable bracket, so it can be positioned for pre-08 SJ, 08+ SJ and Kawasaki
  11. T Bear

    T Bear Active Member

    Here is a photo of Knoxies pole on Taynes 08 race boat with pre 08 steering cable fits perfectly and easy fit up.. running stock hieght bracket ,works equally as well with lowered bracket
    Know having a couple of these poles and a rickroy pole knoxies poles are hard to beat for price and performance

    [​IMG]
  12. knoxie

    knoxie Active Member

    looks like the gopro mount on the tube worked out all good!
  13. Timmy

    Timmy Member

    Got any poles left?
    And do they fit into your lowered pole bracket?
  14. bombsquad

    bombsquad Member

    Yes. Clearly stated by Terry two posts above yours....
  15. knoxie

    knoxie Active Member

    Yes, and yes will fit that bracket (will fit most brackets out there)
  16. knoxie

    knoxie Active Member

  17. knoxie

    knoxie Active Member

  18. knoxie

    knoxie Active Member

  19. knoxie

    knoxie Active Member

    more stock ready to go.

    anodising now available too
  20. jetleigh

    jetleigh Member

    Dam it all your gear comes back into stock when I am out of cash.

Share This Page