1st Blaster Build

Discussion in 'User's Rides and Builds' started by -Sparx-, March 16, 2014.

  1. -Sparx-

    -Sparx- New Member

    Hey guys. Been on here for a little bit but havnt posted much. More reading etc to learn about these things.

    Brought my 1st blaster in Dec. Been doing bits and pieces on it since then to make it better as it was a piece of shyt when I got it.

    Standard engine bay was ugly .. has some weird home made waterbox

    [​IMG]

    Chucked a Protec pipe on it

    [​IMG]

    Some custom modified carb

    [​IMG]

    Alloy pump shoe from OPW, and a Solas I, and R&D intake grate

    [​IMG]

    Pulled my protec ride plate off and modified a factory one to suit

    [​IMG]

    Chucked a bolt on rocker on thanks to Dave at 701 ind.

    [​IMG]

    Proceded to test accordingly

    [​IMG]

    Still have things I want to do when budget allows. Doing bars, and control stuff next and need to sort some footstraps. Then some hydro turf.

    Wanting to build a tougher motor over winter too. Need to source a 62T cases. Not sure how hard they are to find ?

    Anything else I need to know or should aim for ?

    Cheers
  2. Sickboi

    Sickboi Member

    Aim to flip. don't worry about all that shinny shit.
  3. -Sparx-

    -Sparx- New Member

    New engine install on the weekend
    760cc with mild porting and an ADA girdled head. Still running protec pipe and a single carb.

    [​IMG]

Share This Page